DANNMAR DT-50A + DB-70 + WEIGHTS BUNDLE

Package Deal: (1) DT-50A + (1) DB-70 + (1) Tape Weight Rolls / Black and Silver 1400 pc. This Dannmar wheel service package consists of a DT-50A tire changer with a swing arm that is equipped with a handy power-assist tower to help when working on sometimes difficult, lower-profile performance tires with stiffer sidewalls. The swing-arm on the DT-50A is one of this tire changer’s most useful features. Because it doesnt tilt back, it can be installed flush against a wall. The tire changer’s controls are conveniently mounted upfront and logically arranged for both speed and ease-of-use. Constructed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging modern allow wheels. The Dannmar DB-70 balancer works on wheels up to a 28” diameter. Dannmar’s very accurate and dependable balancer uses proprietary Digital Sensor Technology for critical reliability and repeatability. With this science, it automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that shows the correct amount and location of weights in about six seconds. Best of all, this well-performing, wheel service package is affordable. Features DT-50A Features Alloy steel mount and demount head w/protective plastic covers Traveling drop-center, top-mount helper/swing-in bottom helper disc High Torque Electric Turntable Adjustable Internal Rim Clamping - Capacity - 12” – 21” (304 mm - 533 mm) Maintenance-free gearbox Aluminum pneumatic cylinders High-pressure polyurethane pneumatic tubing Enhanced bead Breaker Blade Turbo-Blast Bead Seater Inflation Gauge with Integrated Air Dump Valve Tool Tray/Storage Soap Bucket Enhanced Bead Breaker Blade Oiler/Lubricator Optional motorcycle clamps Air Regulator Inflation restraint Forged steel foot pedals DB-70 Features Top positioning weight locator Inside and outside measuring Manual wheel offset distance setting Auto-start when hood is lowered Wheel holding manual brake pedal Truck cone/spacer ring adapter set Wheel calipers No-mar rear cone mount pressure cup Quick-release and mount hub nut Tape weight feeder LED rolling wheel weight displays Specs DT-50A Specifications Motor 110-VAC, 50-60 Hz, 1-Ph Drive System Type Electric / Air Tower Design Rigid Fixed / Swing Arm Power Assist Tower Single Bead Seating System Turbo Blast / Bead Seating Air Requirement 110-175 PSI (8-10 BAR) Wheel Clamping Method 4 Clamps - Internal / External Table Clamping System Dual Pneumatic Cylinders Bead Breaking System Pneumatic Blade Tower Design Fixed Internal Rim Clamping Capacity 14” – 26” (356 mm - 660 mm) External Rim Clamping Capacity 12” – 24” (305 mm - 610 mm) Turntable Rim Width Capacity 3” – 15” (76 mm – 381 mm) Bead Breaker Rim Width Capacity 3” – 14” (76 mm – 356 mm) Maximum Tire Diameter 49” (1,245 mm) Noise <70 dB DB-70 Specifications Motor 110-230 VAC, 50-60 Hz, 1-Ph Cycle Time 7 seconds Balancing Modes 6 Dynamic / 1 Static Drive System Serpentine Poly-V Belt Wheel Braking Lever Caliper Brake / Foot Pedal Cones Included 4 Max. Tire Diameter 49” (1,247 mm) Max. Tire Weight 150 lbs. (68 kg) Wheel Diameter Capacity 10” - 28” (254 mm - 711 mm) Wheel Width Capacity 1.5” - 20” (38 mm - 508 mm) Balancing Increments 0.25 or 0.01 ounce Balancing Speed 260 RPM Accuracy +- 1 Gram (.035 oz) Noise <70 dB