DANNMAR D4-12A 12,000-LBS. CAPACITY ALIGNMENT FOUR-POST LIFT / INCLUDES SLIP PLATES AND TURNPLATES

Dannmar’s 12,000 lb. capacity alignment lift is two lifts in one. That’s because it works as an alignment system and a car lift. Dannmar’s utilized industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance. This is the sturdy alignment lift for most shops, especially if you service large, low ground-clearance vehicles. Dannmar’s alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with free-floating and no resistance. Dannmar’s D4-12A four-post alignment lift utilizes multi-caster slip plates in the rear and turn plates in the front that allow for very precise alignments. These turn plates also provide more clearance for equipment installations. The lift can otherwise be used for most repairs and vehicle or light to medium weight truck storage. With a lift like the Dannmar D4-12A, shops can free up extra floor space or increase parking capacity. The Dannmar D4-12A alignment lift comes standard with robust 10.5” diameter dual-hub cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles. A heavy-duty 1/2” diameter aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions from weather, chemicals, and hydraulic oil. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service. Other features include electric/hydraulic power, push button pneumatic lock release, adjustable height locking positions, an optional rolling bridge jack, and more. Features 12,000 pound lifting capacity CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493 Heavy-duty turn plates and integrated rear slip-plates Multi-position turn plate pockets Automatic leveling system Multiple auto-leveling locking positions Runways include rail-kit for optional accessories Electric / hydraulic power system Single hydraulic cylinder mounted underneath runway Fully enclosed lifting cables, safety locks, and sheaves Internal “Anti-Sway” slider blocks in each column Oversize sheaves and heavy-duty 1/2” aircraft cable Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves Multi-position safety locks in each column with push-button safety release Runways adjust for different tread widths and feature non-skid surface Optional 6,000-lb. capacity bridge jacks available Specs SKU# 5175318 Lifting Capacity 12,000 lbs. (5,443 kg) A - Min. Runway Height 9.5" (243 mm) B - Max. Rise 68.75" (1,746 mm) C - Max. Lifting Height 79.5" (2,019 mm) D - Ramp Clearance* (Max. Rise) 49" (1,245 mm) E - Height of Columns 92" (2,337 mm) F - Drive-Thru Clearance 98” (2,482 mm) G - Overall Width 127.5" (3,239 mm) H - Width Between Columns 115.75" (2,940 mm) I - Overall Length 233.5" (2,940 mm) J - Outside Columns 115.75" (2,940 mm) K - Width Between Runways 34.5" (876 mm) or 41.5" (1,054 mm) L - Runway Centerline 54.5" (1,384 mm) or 61.5" (1,562 mm) M - Outside Edge of Runways 74.5" (1,892 mm) or 81.5" (2,070 mm) N - Runway Width 20" (508 mm) O - Length of Runways 194.75" (4,947 mm) Min. 4-Wheel Alignment 106” (2,692 mm) Max. 4-Wheel Alignment 158.5” (4,026 mm) Max. 2-Wheel Alignment 163.5” (4,153 mm) Min. Wheelbase @ Rated Capacity 140” (3,556 mm) Min. Wheelbase @ 75% Capacity 120” (3,048 mm) Min. Wheelbase @ 50% Capacity 100” (2,540 mm) Min. Wheelbase @ 25% Capacity 80” (2,032 mm) Locking Positions 15 (spaced every 4” / 102 mm) Time to Full Rise 60 seconds Motor 220 VAC / 60 Hz / 1 Ph * Approach ramps can be removed.