Description
The XPR-10AXLS Offers Extended Height PLUS 75" Lifting Height 10K car lifts dont offer taller lift carriages or get easier to work under than this. If you need maximum security and an extended working height thats ideal for taller individuals, you need the BendPak XPR-10AXLS. This particular two-post lift features an absolutely massive 75" cylinder stroke, which means we did more than just extend the columns for the sake of overhead clearance. We actually lift the bottom of the vehicle 6" higher than our standard 10K lift height. True safety requires taller carriages. Higher carriages eliminate balance issues that come into play when lifting trucks and SUVs. Direct-Drive technology The XPR-10AXLS offers tandem performing, low-pressure HVLP direct-drive cylinders that replace the lifting chains and screw-type mechanisms often featured on other two-post lifts. These direct-drive cylinders prevent leaks, are more reliable and run more smoothly than other systems too. Two-post lift operators generally prefer our Direct-Drive technology, as it requires fewer moving parts than chain-over lifts. Hydraulic fluid gets pressurized, starting at the power unit and flowing through the hollow cylinder rods. The downward motion of the piston rod raises the massive 75" lifting height while dual-synchro equalizers ensure a safe, even, worry-free lift. Two-Stage telescoping screw pad assembly kit BendPaks two-stage telescoping screw pads are second-to-none in strength and durability. Thats good, because we hope youre going to be using this lift for decades. Gouge and tear-resistant polyurethane pads improve safety and ensure youre not constantly replacing equipment. We even throw in a set of 63 mm stackable adapters when you purchase the XPR-10AXLS. Low-profile, dropped-end frame contact pads Extremely low-profile contact pads are well-suited for compacts and sport cars. The dropped-end frame design makes your two-post lift arguably the most versatile lift ever made. Triple-telescoping front arms and two-stage rear arms Increases overall arm positioning for lifting a variety of wheelbases. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM-recommended pick-up points and wide and/or narrow configurations. Lowered arm tube supports Our arm tube supports are kept low, maximizing clearance for vehicles of almost any size and type under 10,000 lbs. Automatic arm restraints Each telescoping arm has extremely durable restraints that engage when the lift rises and release as it lowers. This makes repositioning the arms fast, easy and always safe. Our tallest lift carriages ever The 59" carriage height on the XPR-10AXLS is the highest in class for our 10K two-post lifts. Youll be hard-pressed to find a safer lift at a better value for your taller techs. Finally, tall mechanics can work ergonomicallyno more painful stooping to get the job done. Maintenance-free load bearings BendPak uses UHMW load bearings to protect your vehicle when its up in the air. These bearings are located at the pivot point where the telescoping arm meets the lift carriage. Ours are so well designed theyre virtually indestructible and should last more than the lifetime of your lift. Single-piece columns Why make our columns a single piece of steel? It reduces stress and fracture points. Simply put, your car lifts columns are never going to let you down. The foundation of every BendPak lift is built to last for many decades of continuous, heavy-duty use in a fast-paced shop. Single-point safety release Safety is our main concern, and thats no joke when lifting up to 10,000 lbs. A single point safety release ensures two hands need to be on the lift during operation. This virtually eliminates pinch potential and other accidents that commonly occur on lifts made by less scrupulous manufacturers. Auto shutoff A super-tall two-post lift needs a safety measure to ensure high-clearance vehicles dont smash into the upper support beam. The padded auto-shutoff bar ensures lift functions cease the second a vehicle touches it. Features & Specs Lift arms shown with optional foot guards 10,000?lb. lifting capacity Expandable top beam accommodates wide or narrow configuration Double?telescoping screw pads offer increased versatility Padded overhead safety shutoff bar Single?piece columns Dual hydraulic direct?drive cylinders Automatic arm restraints Lowered arm tube supports Maintenance-free UHMW load bearings Oversized 59" tall carriage for superior strength and durability Electric / hydraulic power system Large, 17" x 19" A36 steel base plate Self?lubricating dura?glide UHMW polyethylene bearing system Single?point safety release Safety locks in each column spaced every 3" Automatic overhead shutoff Plated arm restraints and arm pins for rust prevention Heavy?duty 1/2" aircraft?quality equalizer cables Oversized cable sheave diameter reduces cable fatigue 4?piece 63 mm stackable adapter set comes standard ALI Certified Capacity Lifting Capacity* 10,000 lbs. (4,536 kg) *Max Capacity / Front Axle 5,000 lbs. (2,268 kg) *Max Capacity / Rear Axle 5,000 lbs. (2,268 kg) Rise A - Rise: 75" (1,905 mm) B - Rise + Pad Only: 79.75" (2,026 mm) C - Rise + Pad + 63 mm Adapter: 82.75" (2,102 mm) D - Min. Height + Pad: 4.75" (121 mm) Time to Full Rise: 50 seconds Outside Dimensions E - Height Overall: 181" (3,988 mm) F - Width Overall: 137" (3,480 mm) or 145" (3,683 mm) G - Outside Columns: 133.25" (3,385 mm) or 141.25" (3,588 mm) Inside Dimensions H - Inside Columns: 106.25" (2,699 mm) or 114.25" (2,902 mm) I - Drive-Thru Clearance: 93.75" (2,381 mm) or 101.75" (2,584 mm) J - Floor To Overhead Switch: 147" (3,734 mm) Arms & Pads K - Front Arm Reach: (MIN) 23.5" (597 mm) K - Front Arm Reach: (MAX) 43.75" (1,111 mm) L - Rear Arm Reach: (MIN) 40.25" (1,022 mm) L - Rear Arm Reach: (MAX) 58" (1,473 mm) Screw Pad Adjustment: 2" (51 mm) Max Load Per Arm 2,500 lbs. (1,134 kg) Power Unit Motor: 220 VAC / 60 Hz / 1 Ph Noise: 45 dB Shipping Weight: 1,814-lbs. (822.8 kg) Dimensions: 164 x 24 x 29 (4165 mm x 609 mm x 737 mm) Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
